Dva Iphone na stejne WiFi
Napsal: úte bře 25, 2008 2:37 am
Ahoj predpokladam ze se to tu jeste neresilo, mam s bratrem Iphone, pri pripojeni pres wifi jeden nebo druhej nenajde server. Zkouseli jsem i static, predrim router prideloval adresu pres DHCP, vzdy to na jednom nastavi nejakou ip 164...., uz jsem zkousel reset atd... Vzdy jede jeden pokud nejede druhej.. Asi napisu i Applu... Dik za pomoc
Fw 1.1.4
uz jsem to vyresil, nekoumu to snad pomuze... jinak to smazte
As was mentioned there can be a conflict with wireless IP addresses when iPhone tries to connect to your wireless router.
Step 1: open your network pref pane and click one TCP/IP info. generally you should see Using DHCP. Note your subnet mask and router IP address.
Step2: on the iPhone -go to "settings" - Wi-Fi set to "on" and select: choose a network
Step 3: after selecting your wireless network change to static IP temporarly.
Step 4: clear IP address field go down to subnet mask and enter manually same with router Ip you saw on the pref pane.
Step 5: switch back to DHCP and renew
If you are prompted for a WEP switch to WEP ACII and preceed password with $. ..sometimes not required.
You may need to click "forget network" and turn off phone before proceeding with the above.
Fw 1.1.4
uz jsem to vyresil, nekoumu to snad pomuze... jinak to smazte
As was mentioned there can be a conflict with wireless IP addresses when iPhone tries to connect to your wireless router.
Step 1: open your network pref pane and click one TCP/IP info. generally you should see Using DHCP. Note your subnet mask and router IP address.
Step2: on the iPhone -go to "settings" - Wi-Fi set to "on" and select: choose a network
Step 3: after selecting your wireless network change to static IP temporarly.
Step 4: clear IP address field go down to subnet mask and enter manually same with router Ip you saw on the pref pane.
Step 5: switch back to DHCP and renew
If you are prompted for a WEP switch to WEP ACII and preceed password with $. ..sometimes not required.
You may need to click "forget network" and turn off phone before proceeding with the above.